Home  > Projects  > More Membrane Structure Projects  >  Architecture tent membrane structure canopy
Architecture tent membrane structure canopy

Architecture tent membrane structure canopy

Completion Time
May, 2017
Construction Site
No. 19 Middle School in Luogang District, Guangzhou
Project Area
1500 Square Meters
Structure Selection
Main Structure adopts Q235 Steel Pipe
More than 15 years
Delivery Time
Within 25 Days after confirm deposit
Film Type
White PVDF architectural film imported from Germany, Total Weight 1000g/㎡, Thickness is 0.95mm
T/T, VISA, Master Card, E-checking, L/C, Cash (30% deposit, 70% balance before delivery)
Place of Origin
China Guangzhou
Get Latest Price
Get the latest price
Quantity Needed:

Project Description
Membrane Structure


    With the gradual improvement of people’s living standards, the demand for domestic construction projects is increasing. This is a sign of China’s prosperity and strength. This project is the first campus cafeteria built in the country for the first time in the country, with less capital investment, shorter construction time, and stronger practicality. At the same time, it forms a landscape.


    The project is located at No. 19 Middle School in Luogang District, Guangzhou and is the school’s outdoor canteen shading. This structure adopts a ridge-shaped tensioned film shape and has a rough surface.


    This styling is usually applied to awnings such as sports stand shade, sports activities, community entrances, commercial streets, etc. The meticulous design makes it simple and generous, with different styles.

Design Load & Material Parameter
Membrane Structure

  Design Load

Live Load: 0.30kn/m2;
Basic Snow Pressure: 0.10kn/m2;
Lifespan: 15 years.
Basic Air Pressure: 0.40 kn/m2;
Pre-tension of the Film Warp/weft=2.0/2.0 kn/m.

Material Parameter

 ◪ 1.All the steel pipes used are hot-pressed seamless steel pipes. All the main materials are Q235 steel, in line with GB700-88

 ◪2.The pipe-to-pipe connection and pipe-to-connector connection use a butt weld or full-period fillet weld.

  3.All butt welds must be cut-through welds. These welds are not specified and the weld grade is Grade 3.

  4.Where the weld is not a fillet weld, the weld foot is not less than 4mm. All exposed mouths have sealing plates.

  5.Bolts are galvanized common large hex head bolts, in line with GB5780-86; nuts in line with GB41-86.

  6.The membrane fabric is made of PVC membrane material with PVDF coating on the surface.

  7.The wire rope material conforms to the universal wire rope standard "GB/T8918-196" and its surface is galvanized.

Luogang shelter structure - side view
Luogang shelter structure - elevation
Luogang shelter structure construction - floor plan

Product Installation
Membrane Structure


    Appearance inspections are performed on all weld locations. The visual inspection level is Class B.


    Rust removal is applied at the surface of all components and the rating is St3.


    All steel components are treated with sharp corners, burrs and flashes. After the weld is welded, the slag and spatter are removed.


    Super-long steel structural parts are processed in the factory according to the reasonable transport capacity segment, transported to the site assembly welding, and required to ensure that the strength of the assembled weld is stronger than the original steel components.


    Prior to installation and construction of steel structures, it is necessary to check and measure the precision of embedded parts in advance.


    Reasonably arrange the installation sequence of steel structure and membrane structure.

Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...